A dry basement protected by effective basement waterproofing is critical for any home or building as a damp foundation can wreak havoc in many ways. 

While most people think of interior basement waterproofing methods when seepage starts to occur, in some cases waterproofing from the outside can be a better way to prevent these issues; our basement and foundation experts will know which method is best for your home.

Exterior basement waterproofing solutions can stop the dampness problems before they even start. 

What Is Exterior Basement Waterproofing? 

Basement waterproofing is a common practice used to prevent or correct water seepage into the foundation or basement of any structure.

One of the ways in which this is done is with an exterior waterproofing system installed to the outside of the foundation.

Exterior waterproofing, also called “positive-side waterproofing,” is an excellent basement waterproofing solution to consider when building new construction or when conditions warrant this type of remedy to prevent water seepage from the outside. 

Is Exterior Waterproofing Better Than Interior Waterproofing?

There are pros and cons to both types of basement waterproofing methods that must be considered when choosing one.

There are also many other factors that must be considered when deciding which method is preferable to seal a foundation.

In this sense, exterior waterproofing is as effective as interior waterproofing when used in the right situations to prevent or eliminate water seepage.

It may be a bit more work-intensive to apply; however, exterior waterproofing should be considered along with interior waterproofing when conditions warrant it. 

Based on these factors, the decision of which basement waterproofing barrier to use should be made collectively with an experienced foundation service that can diagnose drainage and seepage issues and formulate the best solution.

As a preventive measure, exterior waterproofing during foundation construction is recommended in areas where groundwater and hydrostatic pressure are known to cause foundation cracks and damp basements.

How Does Exterior Basement Waterproofing Work? 

Exterior basement waterproofing solutions work by covering the outside foundation walls and protecting them from the effects of ground pressure and groundwater.

Applied in two part, as a moisture barrier and then a covering that protects the moisture barrier, hydrostatic pressure and ground shifting will not damage the water barrier.

The two-part barrier waterproofing method with an in-ground drainage and water collection system under the edges of the walls can be installed either at the time that the foundation is being built or afterward by digging out around the foundation.

Once applied, the ground is replaced around the foundation to hold it in place and the inside of the basement remains untouched yet stays completely dry.

Waterproof Your Basement Before The Leaking Starts

A great waterproofing solution for any basement or foundation is sealing it off before there is a possibility for moisture to somehow work its way in.

Interior basement waterproofing is the typical answer, but it may not be enough in all situations. 

To prevent damp basements while protecting even the finest little foundation cracks caused by hydrostatic pressure, using an exterior basement waterproofing method can be an ideal solution. 

When water cannot bypass the barrier at its source, a drier basement and building is the result!

Need Basement Waterproofing Solutions In Wichita Kansas?

AAA Basement & Foundation Knows Exterior Basement Waterproofing!

Call 316-844-1615 To Find Out More!