When a home’s foundation suffers structural damage, foundation repairs may become essential to protect the entire building.

Depending on the type and extent of the problem, there are multiple foundation repair solutions available to stabilize the foundation and stop the damage from progressing.

A foundation repair service will choose one or more of the techniques below to do so.

1. Mudjacking Foundation Repairs

Mudjacking, also referred to as slabjacking, is a basic foundation repair used to re-balance concrete slab foundations that have settled unevenly due to soil compaction and prevent them from sinking any further.

To perform this method, foundation repair services drill small holes through the slab, then pump in a mixture of cement, sand, and other materials to fill gaps and empty spaces beneath the slab, then raise sunken ends so it is once again level.

2. Polyurethane Foam Jacking Foundation Repairs

Similar but slightly different from mudjacking is a foundation repair solution called foam jacking, also known as polyjacking.

Polyurethane foam jacking is done the same way as mudjacking but used in circumstances where the gaps and voids beneath a slab foundation are caused by soil erosion.

When pumped below the concrete slab, polyurethane foam material fills empty spaces beneath the slab and expands, raising it up to level again and stabilizing it.

There are multiple foam formulas that can be used depending on the extent of the damage, soil type and conditions, and other related factors.

3. Pier Foundation Repair Solutions

Pier foundation repairs are done in a variety of ways to support and stabilize concrete slab and basement foundations that need not just support to the floor, but also the walls.

Foundation repair services install support piers deep into solid, stable ground, then connect them to the problematic foundation, building a structural support system to alleviate bowing and take the pressure off cracks, stabilizing the structure and preventing further damage.

There are multiple types of piers used for this foundation repair solution, each one chosen based on different factors such as soil qualities, position on the foundation, and others:

Steel Piers - Galvanized steel piers that are driven into the earth using a hydraulic jack to stabilize beneath the foundation and prevent sinking or shifting.
Helical Piers - Galvanized steel piers that are drilled into the ground using a helical point in places where the ground is too hard to drive piers in.
Concrete Piers and Piles - Poured concrete piers are installed by drilling cylindrical holes beneath the foundation and filling them with concrete to support the slab, while piles are concrete supports that are put in place beneath the foundation in the same way that steel piers are.
Segmented Piers - An inexpensive and preventive foundation repair that involves inserting concrete tubes beneath the foundation prior to construction to prevent settling in places where it is more likely to occur.
Spot Piers - Used to support parts of the foundation that are under stress or beginning to exhibit cracks, placing spot piers involves hand-digging at specific locations, then filling those spots with concrete piles or poured concrete.

Discuss Foundation Repair Options With A Foundation Repair Service

A damaged foundation in need of foundation repair solutions is a problem that every homeowner should take seriously.

Fortunately, no matter what the problem is, a professional foundation repair service can diagnose it and use a suitable repair method to stabilize it and prevent further damage!